NASA’s Hubble Spots Possible Water Plumes Erupting On Jupiter's Moon Europa

For the first time, Kepler measured the “shock breakout” of a star, the early flash from the shockwave of a dying red supergiant. The flash comes from a type II supernova, KSN 2011d. Read more

NASA Astronomy Picture of the Day 2016 April 6 

Auroras and the Magnetosphere of Jupiter 

Jupiter has auroras. Like near the Earth, the magnetic field of our Solar System’s largest planet compresses when impacted by a gust of charged particles from the Sun. This magnetic compression funnels charged particles towards Jupiter’s poles and down into the atmosphere. There, electrons are temporarily excited or knocked away from atmospheric gases, after which, when de-exciting or recombining with atmospheric ions, auroral light is emitted. The featured illustration portrays the magnificent magnetosphere around Jupiter in action. In the inset image released last month, the Earth-orbiting Chandra X-ray Observatory shows unexpectedly powerful X-ray light emitted by Jovian auroras, depicted in false-colored purple. That Chandra inset is superposed over an optical image taken at a different time by the Hubble Space Telescope. This aurora on Jupiter was seen in October 2011, several days after the Sun emitted a powerful Coronal Mass Ejection (CME).

Langley Research Center Centennial Event

NASA Administrator Charles Bolden, right, and Langley Research Center Director, Dr. David E. Bowles, left, poses for a photo with staff dressed in space suits on Langley Research Center's Centennial float on Thursday, Dec. 1, 2016, at Langley Research Center in Hampton, VA.

Photo Credit: NASA Langley Research Center

The Symbols of NASA

NASA also uses symbols for specific projects within the agency. Each space shuttle crew designs a patch that represents what it will do during the mission. Some robotic probes sent to explore space have had mission patches. From the wing of the space shuttle to the top of the NASA homepage, the agency's official insignia is probably its best-known symbol.

The round red, white and blue insignia, nicknamed the "meatball," was designed by employee James Modarelli in 1959, NASA's second year. The design incorporates references to different aspects of the mission of the National Aeronautics and Space Administration. The round shape of the insignia represents a planet. The stars represent space. The red v-shaped vector represents aeronautics. The circular orbit around the agency's name represents space travel. 

After it was introduced, the "meatball" was the most common symbol of NASA for 16 years, but in 1975 NASA decided to create a more "modern" logo. That logo, which consisted of the word "NASA" in a unique type style, was nicknamed the "worm." That logo was retired in 1992, and the classic meatball insignia has been the most common agency symbol since. 

In addition to the insignia, NASA has another official symbol. If the meatball is the everyday face of NASA, the NASA seal is the dressed-up version. The NASA administrator uses the seal for formal purposes such as award presentations and ceremonies. Like the meatball insignia, the seal also includes planet, stars, orbit and vector elements

NASA also uses symbols for specific projects within the agency. Each space shuttle crew designed a patch that represents what they were going to do during the mission. Some robotic probes sent to explore space have had mission patches. 

Image Credits: NASA

Space Launch System (SLS) Core Stage 101

We need the biggest rocket stage ever built for the bold missions in deep space that NASA's Space Launch System rocket will give us the capability to achieve. This infographic sums up everything you need to know about the SLS core stage, the 212-foot-tall stage that serves as the backbone of the most powerful rocket in the world. The core stage includes the liquid hydrogen tank and liquid oxygen tank that hold 733,000 gallons of propellant to power the stage’s four RS-25 engines needed for liftoff and the journey to Mars. 

Image Credit: NASA/MSFC

5 Out-of-This World Technologies Developed for Our Webb Space Telescope

Our James Webb Space Telescope is the most ambitious and complex space science observatory ever built. It will study every phase in the history of our universe, ranging from the first luminous glows after the Big Bang, to the formation of solar systems capable of supporting life on planets like Earth, to the evolution of our own Solar System.

In order to carry out such a daring mission, many innovative and powerful new technologies were developed specifically to enable Webb to achieve its primary mission.  

Here are 5 technologies that were developed to help Webb push the boundaries of space exploration and discovery:

1. Microshutters

Microshutters are basically tiny windows with shutters that each measure 100 by 200 microns, or about the size of a bundle of only a few human hairs. 

The microshutter device will record the spectra of light from distant objects (spectroscopy is simply the science of measuring the intensity of light at different wavelengths. The graphical representations of these measurements are called spectra.)

Other spectroscopic instruments have flown in space before but none have had the capability to enable high-resolution observation of up to 100 objects simultaneously, which means much more scientific investigating can get done in less time. 

Read more about how the microshutters work HERE.

2. The Backplane

Webb’s backplane is the large structure that holds and supports the big hexagonal mirrors of the telescope, you can think of it as the telescope’s “spine”. The backplane has an important job as it must carry not only the 6.5 m (over 21 foot) diameter primary mirror plus other telescope optics, but also the entire module of scientific instruments. It also needs to be essentially motionless while the mirrors move to see far into deep space. All told, the backplane carries more than 2400kg (2.5 tons) of hardware.

This structure is also designed to provide unprecedented thermal stability performance at temperatures colder than -400°F (-240°C). At these temperatures, the backplane was engineered to be steady down to 32 nanometers, which is 1/10,000 the diameter of a human hair!

Read more about the backplane HERE.

3. The Mirrors

One of the Webb Space Telescope’s science goals is to look back through time to when galaxies were first forming. Webb will do this by observing galaxies that are very distant, at over 13 billion light years away from us. To see such far-off and faint objects, Webb needs a large mirror. 

Webb’s scientists and engineers determined that a primary mirror 6.5 meters across is what was needed to measure the light from these distant galaxies. Building a mirror this large is challenging, even for use on the ground. Plus, a mirror this large has never been launched into space before! 

If the Hubble Space Telescope’s 2.4-meter mirror were scaled to be large enough for Webb, it would be too heavy to launch into orbit. The Webb team had to find new ways to build the mirror so that it would be light enough - only 1/10 of the mass of Hubble’s mirror per unit area - yet very strong. 

Read more about how we designed and created Webb’s unique mirrors HERE.

4. Wavefront Sensing and Control

Wavefront sensing and control is a technical term used to describe the subsystem that was required to sense and correct any errors in the telescope’s optics. This is especially necessary because all 18 segments have to work together as a single giant mirror.

The work performed on the telescope optics resulted in a NASA tech spinoff for diagnosing eye conditions and accurate mapping of the eye.  This spinoff supports research in cataracts, keratoconus (an eye condition that causes reduced vision), and eye movement – and improvements in the LASIK procedure.

Read more about the tech spinoff HERE. 

5. Sunshield and Sunshield Coating

Webb’s primary science comes from infrared light, which is essentially heat energy. To detect the extremely faint heat signals of astronomical objects that are incredibly far away, the telescope itself has to be very cold and stable. This means we not only have to protect Webb from external sources of light and heat (like the Sun and the Earth), but we also have to make all the telescope elements very cold so they don’t emit their own heat energy that could swamp the sensitive instruments. The temperature also must be kept constant so that materials aren’t shrinking and expanding, which would throw off the precise alignment of the optics.

Each of the five layers of the sunshield is incredibly thin. Despite the thin layers, they will keep the cold side of the telescope at around -400°F (-240°C), while the Sun-facing side will be 185°F (85°C). This means you could actually freeze nitrogen on the cold side (not just liquify it), and almost boil water on the hot side. The sunshield gives the telescope the equivalent protection of a sunscreen with SPF 1 million!

Read more about Webb’s incredible sunshield HERE. 

Learn more about the Webb Space Telescope and other complex technologies that have been created for the first time by visiting THIS page.

For the latest updates and news on the Webb Space Telescope, follow the mission on Twitter, Facebook and Instagram.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

Voyager 2 Photograph of Jupiter

A photo of Jupiter. Took by Voyager with VGISS on July 02, 1979 at 06:01:35. Detail page on OPUS database.

NASA’s Transiting Exoplanet Survey Satellite (TESS) 

The Transiting Exoplanet Survey Satellite (TESS) is the next step in the search for planets outside of our solar system, including those that could support life. The mission will find exoplanets that periodically block part of the light from their host stars, events called transits. 

 TESS will survey 200,000 of the brightest stars near the sun to search for transiting exoplanets. The mission is scheduled to launch in 2018.  

The TESS launch date is NLT June 2018 (the current working launch date is April 2018).

Music: "Prototype" and "Trial" both from Killer Tracks. Credit: NASA’s Goddard Space Flight Center

NASA Goddard Space Flight Center

The NASA Aeronautics team is working to transform aviation by enabling a new commercial market for supersonic travel over land. The centerpiece of this effort is the X-59 QueSST (short for Quiet SuperSonic Technology), a new X-plane designed to produce sonic "thumps" that could open the door to new certification standards for commercial supersonic service. NASA and Lockheed Martin are working together to design and build the X-59. Beginning in 2023, NASA will use this X-plane to measure public response to sonic thumps. 

More at www.nasa.gov/lowboom

The James Webb Space Telescope

Like your backyard telescope, just MUCH more powerful

In 2018, we’re launching the world’s biggest space telescope ever - the James Webb Space Telescope. Webb will look back in time, studying the very first galaxies ever formed. While Webb doesn’t have a tube like your typical backyard telescope, because it’s also a reflector telescope it has many of the same parts! Webb has mirrors (including a primary and a secondary) just like a small reflector telescope, only its mirrors are massive (6.5 meters across) and coated in gold (which helps us reflect infrared light).

How does a reflector telescope work? Light is bounced from the primary to the smaller secondary mirror, and then directed to your eye:

Webb works pretty much the same way!

Taking the place of your eye to the eyepiece is a package of science instruments, including cameras and spectrographs, which will capture the light directed into them by the telescope’s mirrors.    

In order to install these instruments, we had to move the telescope structure upside down… an impressive sight!

Once Webb was in place on the assembly stand in the cleanroom, the team at Goddard Space Flight Center installed the instrument module (which we call the ISIM, or Integrated Science Instrument Module), with surgical precision. ISIM has four instruments, three of which were contributed by our partners, the European Space Agency and the Canadian Space Agency. 

All four will detect infrared light from stars and galaxies as far away as 13.6 billion light years. In addition to seeing these first sources of light in the early Universe, Webb will look at stars and planetary systems being formed in clouds of dust and gas. It will also examine the atmospheres of planets around other stars – perhaps we will find an atmosphere similar to Earth’s!

Here is an image with the science instruments being lowered into their spot behind the primary mirror. You can see the golden mirror is face-down.

Here’s another perspective of the instruments being fit into the telescope. 

What you’ve seen come together above is just the telescope part of the James Webb Space Telescope mission – next comes putting together the rest of the observatory. This includes our massive tennis court-sized sunshield (which acts like the tube-part of your backyard telescope, protecting the mirrors from stray light and heat), as well as the parts that do things like power the telescope and let us communicate with it.

It actually takes several weeks for Webb to completely unfold into its full deployment!

Follow us on Twitter, Facebook and Instagram for updates on our progress. You can also visit our site for more information: http://jwst.nasa.gov

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Photo Credit #1: NASA/Chris Gunn. Photo Credit #2: NASA/Desiree Stover