I Am Laughing So Hard Oh My God Clickhole

So I’m fitting a carpet and look outside and theres a really cool stick in the garden, so I take a picture and send it to the discord, my DM proceeds to make gold from it.

As active as i normally am

who’s still on tumblr?

reblog if you plan on remaining active.

just wanna see if the number’s still huge! ☆

More messy sketchies day 20! Bestest duo, loneyeyes

@emerald-emerlad

Here's me! It's as close as I could get...didn't have curly hair or brown eyes...

its me!

Foam to Leather (Tutorial)

Things you’ll need:

Brown craft foam

Aluminum foil

Clothes iron

Ironing board

Black paint

Brown paint (lighter than your foam)

Paint brush

Paper towel

Grab some aluminum foil and crumble it into a ball. Not too tight of a ball though! The next step is almost impossible if you do. 

Next, un-crumple the ball. Flatten it out into one layer. It’s fine if there are a few holes.

Place it on top of your foam.

Take your iron and firmly press it on the foam and aluminum. My iron was set to 3 (polyester) but the correct temperature may be different for other irons. Just remember not to use steam! Before doing this on a large piece, be sure to experiment and figure out what the best temperature and what the best pressure is. On larger pieces, you’ll have to move the aluminum around a lot. It’s not a quick process.

Now you’ve got this crinkly affect on the foam. Next is painting!

Grab you’re brush, black paint, and a dish with some water. The idea is to dilute the black paint enough so that when you apply it the paint will seep into the divets the aluminum created. 

Once the watery paint is applied, wipe it off with a paper towel. Continue to do this for your whole piece of foam.

Now here’s an optional step (of which I haven’t done myself but I’ve known others who have):

Grab the light brown paint and, without diluting it, paint it on. It’s best to use a coarse brush in this case and to try to keep it out of the divets. Wipe some of the paint off. 

Remember, imperfections are always good! Uneven paint isn’t necessarily bad so just experiment with it. 

Here’s an example of a bracer I did with this method. The first two pictures are an example of the foam I began with and the rest show the end result. I hope this helps you guys out!

Day 20 Tim button style

Had a lot of fun with this one hehe

@spacebunprince

Merry Christmas!!!!

Inktober day 2 cabin! @thainaaraujo

I know discourse is the word of choice in fandom nowadays but I kind of wish we would have stuck with “fandom wank” because it carries the implication that the anger involved culminated into effectively nothing and that the act was wholeheartedly masturbatory in nature rather than for any greater cause.

Please reblog if you think that “they/them/theirs” is a valid set of pronouns.

Trying to make a point to my father.