Tiny BurstCube's Tremendous Travelogue

This image shows a small spacecraft on a table enclosed on all sides except the one facing the camera. The sides of the enclosure are clear while the top has two dark gray panels with a light gray frame. The backside is also gray and reflects a strip of light from the room. The spacecraft’s body is a vertical golden rectangle. Shiny black solar panels extend to either side and are much wider than the spacecraft itself. There are a few wires connected to the table, which are visible underneath it. It’s watermarked, “Credit: NASA/Sophia Roberts.”

Tiny BurstCube's Tremendous Travelogue

Meet BurstCube! This shoebox-sized satellite is designed to study the most powerful explosions in the cosmos, called gamma-ray bursts. It detects gamma rays, the highest-energy form of light.

BurstCube may be small, but it had a huge journey to get to space.

Julie Cox, a mechanical engineer at Goddard, presses aluminized tape to the BurstCube instrument in a laboratory. Julie is wearing a mask, blue lab coat, and gloves, and is holding silver tweezers in one hand. The instrument, which is sitting on a table covered in hardware and tools, has raised silver-colored metal cylinders on top of a flat plate with triangular and rectangular cutouts. A roll of tape sits on the table in the foreground. The image is watermarked with “Credit: NASA/Sophia Roberts.”

First, BurstCube was designed and built at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. Here you can see Julie Cox, an early career engineer, working on BurstCube’s gamma-ray detecting instrument in the Small Satellite Lab at Goddard.

BurstCube is a type of spacecraft called a CubeSat. These tiny missions give early career engineers and scientists the chance to learn about mission development — as well as do cool science!

This image shows a woman wearing a long-sleeved blue jacket and blue gloves. Her hair is bound up in a clip. She leans over a table, filling out a form. To the right, on the same table, is a shiny box within another clear box — the BurstCube satellite in its protective case. The dim room behind the woman is full of gray beams that cast shadows against the walls. There is an old white barn door in the far wall. The image is watermarked, “Credit: NASA/Sophia Roberts.”

Then, after assembling the spacecraft, the BurstCube team took it on the road to conduct a bunch of tests to determine how it will operate in space. Here you can see another early career engineer, Kate Gasaway, working on BurstCube at NASA’s Wallops Flight Facility in Virginia.

She and other members of the team used a special facility there to map BurstCube’s magnetic field. This will help them know where the instrument is pointing when it’s in space.

Three men in long-sleeved blue jackets, blue gloves, and red hard hats stand around a thermal vacuum chamber. The chamber has a square silver base and a conical white top. The man on the left is handing a wrench to a man standing on the base of the chamber. On the right, the third man looks up at the top of the chamber. They are in a lab with a high ceiling and lots of electrical equipment. An American flag hangs from the ceiling. The image is watermarked “Credit: NASA/Sophia Roberts.”

The next stop was back at Goddard, where the team put BurstCube in a vacuum chamber. You can see engineers Franklin Robinson, Elliot Schwartz, and Colton Cohill lowering the lid here. They changed the temperature inside so it was very hot and then very cold. This mimics the conditions BurstCube will experience in space as it orbits in and out of sunlight.

A man in a long-sleeved blue jacket, khaki pants, striped socks, and blue shoes sits on a rooftop. In front of him sits a small, shiny, rectangular spacecraft on top of a black case. Bundles of cables connect to the spacecraft and snake off to the right. He’s looking up at a dusky sky, which behind him is streaked with puffy pink and purple clouds. The horizon shows a line of treetops. The image is watermarked “Credit: NASA/Sophia Roberts.”

Then, up on a Goddard rooftop, the team — including early career engineer Justin Clavette — tested BurstCube’s GPS. This so-called open-sky test helps ensure the team can locate the satellite once it’s in orbit.

A black hard-shell box containing the tiny BurstCube satellite sits on a blue economy-class airplane seat by the window. The case has a blue circular NASA sticker, as well as a yellow square sticker, and three other multicolored stickers on the upper half of the case. It is strapped into the seat by a seatbelt. Outside of the window, the wing of the plane is visible, and beyond that, a faint view of the airport. The image is watermarked “Credit: NASA/Julie Cox.”

The next big step in BurstCube’s journey was a flight to Houston! The team packed it up in a special case and took it to the airport. Of course, BurstCube got the window seat!

In this image, a figure in a checkered clean suit and blue gloves loads the BurstCube satellite into a long, gray, rectangular container on a blue table. BurstCube is a smaller rectangle, with gray sides and a shiny black top, where its solar panels rest. In the background, there’s another figure in a clean suit and gloves. There’s a slight reflection that shows this picture was taken through a window. The image is watermarked, “Credit: NASA/Lucia Tian.”

Once in Texas, the BurstCube team joined their partners at Nanoracks (part of Voyager Space) to get their tiny spacecraft ready for launch. They loaded the satellite into a rectangular frame called a deployer, along with another small satellite called SNoOPI (Signals of Opportunity P-band Investigation). The deployer is used to push spacecraft into orbit from the International Space Station.

This photograph shows a rocket launching. The bottom of the image is filled with green vegetation interspersed with blue water. The sky is blue, with white clouds visible in the distance. The rocket is in the air, about two-thirds of the way to the top, followed by a fiery tail. Directly below it, at ground level, is white and gray plume of smoke. This image is watermarked, “Credit: NASA/Glenn Benson”

From Houston, BurstCube traveled to Cape Canaveral Space Force Station in Florida, where it launched on SpaceX’s 30th commercial resupply servicing mission on March 21, 2024. BurstCube traveled to the station along with some other small satellites, science experiments, as well as a supply of fresh fruit and coffee for the astronauts.

In this photograph, the CRS-30 cargo mission is shown docking with the International Space Station. Against a black background, a white cone — the cargo mission — is attached to a cylinder with a whitish top. There are boxes in the foreground. The image is watermarked, “Credit: NASA.”

A few days later, the mission docked at the space station, and the astronauts aboard began unloading all the supplies, including BurstCube!

In this animated GIF, a boxy white tube extends at a 45-degree angle from the bottom right-hand corner. After a moment, two small, dark, rectangular objects come out of the tube. These are the BurstCube and SNoOPI CubeSats. They’re very close together initially, but as they move out of frame, they start to separate. In the background is the blue marble of Earth streaked with white clouds, as seen from the International Space Station. The image is watermarked “Credit: NASA.”

And finally, on April 18, 2024, BurstCube was released into orbit. The team will spend a month getting the satellite ready to search the skies for gamma-ray bursts. Then finally, after a long journey, this tiny satellite can embark on its big mission!

This is a photo of nine members of the BurstCube team. BurstCube is the shoebox-sized satellite sitting behind a clear case in the middle of the group. In the photo are three women and six men. Four people standing form a back row, and the remaining five kneel in front of them on a tile floor. Each wears a brightly colored protective jacket and some are attached by gray cords to the surfaces to help them avoid accumulating static electricity. On the ground in front of the team members is bright yellow caution tape. To the left of the image is additional equipment. The photo is watermarked “Credit NASA/Sophia Roberts.”

BurstCube wouldn’t be the spacecraft it is today without the input of many early career engineers and scientists. Are you interested in learning more about how you can participate in a mission like this one? There are opportunities for students in middle and high school as well as college!

Keep up on BurstCube’s journey with NASA Universe on X and Facebook. And make sure to follow us on Tumblr for your regular dose of space!

Tags

space tech universe science nasa astronomy technology jobseekers launch dream job spaceblr gamma ray bursts cubesat smallsat

12 Great Gifts from Astronomy

This is a season where our thoughts turn to others and many exchange gifts with friends and family. For astronomers, our universe is the gift that keeps on giving. We’ve learned so much about it, but every question we answer leads to new things we want to know. Stars, galaxies, planets, black holes … there are endless wonders to study.

In honor of this time of year, let’s count our way through some of our favorite gifts from astronomy.

Our first astronomical gift is … one planet Earth

So far, there is only one planet that we’ve found that has everything needed to support life as we know it — Earth. Even though we’ve discovered over 5,200 planets outside our solar system, none are quite like home. But the search continues with the help of missions like our Transiting Exoplanet Survey Satellite (TESS). And even you (yes, you!) can help in the search with citizen science programs like Planet Hunters TESS and Backyard Worlds.

This animated visualization depicts Earth rotating in front of a black background. Land in shades of tan and green lay among vast blue oceans, with white clouds swirling in the atmosphere. The image is watermarked with the text “Credit: NASA/Goddard Space Flight Center Scientific Visualization Studio” and “visualization.”

Our second astronomical gift is … two giant bubbles

Astronomers found out that our Milky Way galaxy is blowing bubbles — two of them! Each bubble is about 25,000 light-years tall and glows in gamma rays. Scientists using data from our Fermi Gamma-ray Space Telescope discovered these structures in 2010, and we're still learning about them.

This image captures the majestic “Fermi bubbles” that extend above and below our Milky Way galaxy, set against the black background of space. A glowing blue line horizontally crosses the center of the image, showing our perspective from Earth of our galaxy’s spiral arms and the wispy clouds of material above and below it. Cloudy bubbles, colored deep magenta to represent Fermi’s gamma-ray vision, extend above and below the galactic plane. These bubbles are enormous, extending roughly half of the Milky Way's diameter and filling much of the top and bottom of the image. The image is watermarked “Credit: NASA/DOE/Fermi LAT Collaboration.”

Our third astronomical gift is … three types of black holes

Most black holes fit into two size categories: stellar-mass goes up to hundreds of Suns, and supermassive starts at hundreds of thousands of Suns. But what happens between those two? Where are the midsize ones? With the help of NASA’s Hubble Space Telescope, scientists found the best evidence yet for that third, in between type that we call intermediate-mass black holes. The masses of these black holes should range from around a hundred to hundreds of thousands of times the Sun’s mass. The hunt continues for these elusive black holes.

This cartoon depicts two black holes as birds, with a small one representing a stellar-mass black hole on the left and an enormous one representing a supermassive black hole on the right. These two birds appear on a tan background and flap their wings, and then a circle with three question marks pops up between them to represent the intermediate-mass black holes that scientists are hunting for. The image is watermarked “Credit: NASA’s Goddard Space Flight Center.”

Our fourth and fifth astronomical gifts are … Stephan’s Quintet

When looking at this stunning image of Stephan’s Quintet from our James Webb Space Telescope, it seems like five galaxies are hanging around one another — but did you know that one of the galaxies is much closer than the others? Four of the five galaxies are hanging out together about 290 million light-years away, but the fifth and leftmost galaxy in the image below — called NGC 7320 — is actually closer to Earth at just 40 million light-years away.

$A group of five galaxies that appear close to each other in the sky: two in the middle, one toward the top, one to the upper left, and one toward the bottom. Four of the five appear to be touching. One is somewhat separated. In the image, the galaxies are large relative to the hundreds of much smaller (more distant) galaxies in the background. All five galaxies have bright white cores. Each has a slightly different size, shape, structure, and coloring. Scattered across the image, in front of the galaxies are a number of foreground stars with diffraction spikes: bright white points, each with eight bright lines radiating out from the center. The image is watermarked with the text “Credits: NASA, ESA, CSA, and STScI.”$

Our sixth astronomical gift is … an eclipsing six-star system

Astronomers found a six-star system where all of the stars undergo eclipses, using data from our TESS mission, a supercomputer, and automated eclipse-identifying software. The system, called TYC 7037-89-1, is located 1,900 light-years away in the constellation Eridanus and the first of its kind we’ve found.

This diagram shows the sextuple star system TYC 7037-89-1, a group of six stars that interact with each other in complex orbits. The stars are arranged in pairs: System A, System B, and System C, each of which is shown as having one larger white star and one smaller yellow star. The two stars of System A, in the upper left, are connected by a red oval and labeled "1.3-day orbit." The two stars of System C, just below System A, are connected by a turquoise oval and labeled "1.6-day orbit." Additionally, these two systems orbit each other, shown as a larger blue oval connecting the two and labeled "A and C orbit every 4 years." On the other side of the image, in the bottom right, the two stars of System B are connected by a green oval and labeled "8.2-day orbit." Lastly, Systems A, B and C all interact with System B orbiting the combined A-C system, shown as a very large lilac oval labeled "AC and B orbit every 2,000 years." A caption at the bottom of the image notes, "Star sizes are to scale, orbits are not." The image is watermarked with the text “Illustration” and “Credit: NASA's Goddard Space Flight Center.”

Our seventh astronomical gift is … seven Earth-sized planets

In 2017, our now-retired Spitzer Space Telescope helped find seven Earth-size planets around TRAPPIST-1. It remains the largest batch of Earth-size worlds found around a single star and the most rocky planets found in one star’s habitable zone, the range of distances where conditions may be just right to allow the presence of liquid water on a planet’s surface.

Further research has helped us understand the planets’ densities, atmospheres, and more!

his animated image shows an artist's concept of the star TRAPPIST-1, an ultra-cool dwarf, and the seven Earth-size planets orbiting it. TRAPPIST-1 is large and glows bright orange, while the planets are smaller and in shades of cool gray-blue. The image is highly stylized to look like glowing balls sitting on a shiny surface, and neither the sizes nor distances are to scale. The planets closer to TRAPPIST-1 have droplets of water standing on the surface around them, indicating that they may have liquid water. Planets further away have frost around them, indicating that those are more likely to have significant amounts of ice, especially on the side that faces away from the star. Our view pans across the system, from the center outward, and faint tan rings depict the orbits of each planet. The image is watermarked with the text “Illustration” and “Credit: NASA/JPL-Caltech/R. Hurt (IPAC).”

Our eighth astronomical gift is … an (almost) eight-foot mirror

The primary mirror on our Nancy Grace Roman Space Telescope is approximately eight feet in diameter, similar to our Hubble Space Telescope. But Roman can survey large regions of the sky over 1,000 times faster, allowing it to hunt for thousands of exoplanets and measure light from a billion galaxies.

Our ninth astronomical gift is … a kilonova nine days later

In 2017, the National Science Foundation (NSF)’s Laser Interferometer Gravitational-Wave Observatory (LIGO) and European Gravitational Observatory’s Virgo detected gravitational waves from a pair of colliding neutron stars. Less than two seconds later, our telescopes detected a burst of gamma rays from the same event. It was the first time light and gravitational waves were seen from the same cosmic source. But then nine days later, astronomers saw X-ray light produced in jets in the collision’s aftermath. This later emission is called a kilonova, and it helped astronomers understand what the slower-moving material is made of.

This animated illustration shows what happened in the nine days following a neutron star merger known as GW170817, detected on Aug. 17, 2017. In the first part of the animation, a pair of glowing blue neutron stars spiral quickly towards each other and merge with a bright flash. The merger creates gravitational waves (shown as pale arcs rippling out from the center), a near-light-speed jet that produced gamma rays (shown as brown cones and a rapidly-traveling magenta glow erupting from the center of the collision), and a donut-shaped ring of expanding blue debris around the center of the explosion. A variety of colors represent the many wavelengths of light produced by the kilonova, creating violet to blue-white to red bursts at the top and bottom of the collision. In the second part of the animation, we see the collision as it would appear from Earth, looking like a burst of red light in the lower left and a huge umbrella-shaped cascade of blue light in the upper right, representing X-rays. The image is watermarked with the text “Credit: NASA's Goddard Space Flight Center/CI Lab” and “Illustration.”

Our tenth astronomical gift is … NuSTAR’s ten-meter-long mast

Our NuSTAR X-ray observatory is the first space telescope able to focus on high-energy X-rays. Its ten-meter-long (33 foot) mast, which deployed shortly after launch, puts NuSTAR’s detectors at the perfect distance from its reflective optics to focus X-rays. NuSTAR recently celebrated 10 years since its launch in 2012.

This animation shows an artist’s concept of the NuSTAR X-ray observatory orbiting above the blue marble of Earth and deploying its 10-meter-long (33 foot) mast shortly after launch in 2012. NuSTAR is roughly cylindrical, with a shiny silver covering and a pair of blue solar panels on each of its sides. As we pan around the spacecraft, silver scaffolding extends from inside, separating the ends of the telescope to the right distance to begin observing the universe in X-rays. The image is watermarked with the text “Illustration” and “Credit: Credit: NASA/JPL-Caltech.”

Our eleventh astronomical gift is … eleven days of observations

How long did our Hubble Space Telescope stare at a seemingly empty patch of sky to discover it was full of thousands of faint galaxies? More than 11 days of observations came together to capture this amazing image — that’s about 1 million seconds spread over 400 orbits around Earth!

This animated image zooms into the Hubble Ultra Deep Field, showing how a tiny patch of “empty” sky turned out to contain about 10,000 galaxies. The sequence begins with a starry backdrop, then we begin to zoom into the center of this image. As we travel, larger and brighter objects come into view, including dazzling spiral and elliptical galaxies in reds, oranges, blues, and purples. The image is watermarked with the text “Credit: NASA, G. Bacon and Z. Levay (STScI).”

Our twelfth astronomical gift is … a twelve-kilometer radius

Pulsars are collapsed stellar cores that pack the mass of our Sun into a whirling city-sized ball, compressing matter to its limits. Our NICER telescope aboard the International Space Station helped us precisely measure one called J0030 and found it had a radius of about twelve kilometers — roughly the size of Chicago! This discovery has expanded our understanding of pulsars with the most precise and reliable size measurements of any to date.

In this simulation of a pulsar’s magnetic fields, dozens of thin lines dance around a central gray sphere, which is the collapsed core of a dead massive star. Some of these lines, colored orange, form loops on the surface of the sphere. Others, colored blue, arc away from two spots on the lower half of the sphere and vanish into the black background. The image is watermarked with the text “Simulation” and “Credit: NASA's Goddard Space Flight Center.”

Stay tuned to NASA Universe on Twitter and Facebook to keep up with what’s going on in the cosmos every day. You can learn more about the universe here.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space stars universe gravity science nasa galaxies astronomy astrophysics international space station hubble space telescope cosmos james webb space telescope black holes spaceblr exoplanets

1K notes View Post

nasa

9 years ago

Do not go where the path may lead, go instead where there is no path and leave a trail. —Ralph Waldo Emerson

Tags

mars mars curiosity rover

1K notes View Post

nasa

2 years ago

Why Do X-Ray Mirrors Look So Unusual?

Completed quadrant of an X-ray Mirror Assembly, under development for the JAXA/NASA XRISM mission. It is shaped like a fan with thin metal struts holding it together.

Does the object in this image look like a mirror? Maybe not, but that’s exactly what it is! To be more precise, it’s a set of mirrors that will be used on an X-ray telescope. But why does it look nothing like the mirrors you’re familiar with? To answer that, let’s first take a step back. Let’s talk telescopes.

How does a telescope work?

The basic function of a telescope is to gather and focus light to amplify the light’s source. Astronomers have used telescopes for centuries, and there are a few different designs. Today, most telescopes use curved mirrors that magnify and focus light from distant objects onto your eye, a camera, or some other instrument. The mirrors can be made from a variety of materials, including glass or metal.

Diagram showing a reflecting telescope with a pair of mirrors to focus the light on the detector — in this case, an observer’s eye. The diagram shows the “flow” of light, which starts at a distant galaxy, enters the telescope and bounces off the primary mirror at the bottom of the telescope. Then the light moves to the secondary mirror which redirects the light out of the side of the telescope tube into the observer’s eye.

Space telescopes like the James Webb and Hubble Space Telescopes use large mirrors to focus light from some of the most distant objects in the sky. However, the mirrors must be tailored for the type and range of light the telescope is going to capture—and X-rays are especially hard to catch.

X-rays versus mirrors

X-rays tend to zip through most things. This is because X-rays have much smaller wavelengths than most other types of light. In fact, X-rays can be smaller than a single atom of almost every element. When an X-ray encounters some surfaces, it can pass right between the atoms!

X-ray image of a human elbow. Denser materials, like bone, stop more X-rays than skin and muscle.

Doctors use this property of X-rays to take pictures of what’s inside you. They use a beam of X-rays that mostly passes through skin and muscle but is largely blocked by denser materials, like bone. The shadow of what was blocked shows up on the film.

This tendency to pass through things includes most mirrors. If you shoot a beam of X-rays into a standard telescope, most of the light would go right through or be absorbed. The X-rays wouldn’t be focused by the mirror, and we wouldn’t be able to study them.

Animation first showing a plane of balls face-on and an arrow passing through the space between the balls. Then the angle changes to show the balls edge-on and an arrow bouncing off the top.

X-rays can bounce off a specially designed mirror, one turned on its side so that the incoming X-rays arrive almost parallel to the surface and glance off it. At this shallow angle, the space between atoms in the mirror's surface shrinks so much that X-rays can't sneak through. The light bounces off the mirror like a stone skipping on water. This type of mirror is called a grazing incidence mirror.

A metallic onion

Telescope mirrors curve so that all of the incoming light comes to the same place. Mirrors for most telescopes are based on the same 3D shape — a paraboloid. You might remember the parabola from your math classes as the cup-shaped curve. A paraboloid is a 3D version of that, spinning it around the axis, a little like the nose cone of a rocket. This turns out to be a great shape for focusing light at a point.

A line drawing of a parabola - a cup-shaped curve, shown here on its side - spins around to create a 3D shape. The word “paraboloid” shows on the screen. Then part of the curve fades away, leaving behind two things: a small concave circle, which was one end of the paraboloid, labeled “Radio dishes; optical, infrared and ultraviolet telescope mirrors,” and a cylinder with sloping walls, which was the part of the edges of the paraboloid, labeled “X-ray mirrors.”

Mirrors for visible and infrared light and dishes for radio light use the “cup” portion of that paraboloid. For X-ray astronomy, we cut it a little differently to use the wall. Same shape, different piece. The mirrors for visible, infrared, ultraviolet, and radio telescopes look like a gently-curving cup. The X-ray mirror looks like a cylinder with very slightly angled walls.

The image below shows how different the mirrors look. On the left is one of the Chandra X-ray Observatory’s cylindrical mirrors. On the right you can see the gently curved round primary mirror for the Stratospheric Observatory for Infrared Astronomy telescope.

On the left, a technician stands next to a cylinder-shaped mirror designed for X-ray astronomy. The mirror is held in a frame a little off the ground, and is about as tall as the technician. On the right, two technicians inspect a round mirror for optical astronomy.

If we use just one grazing incidence mirror in an X-ray telescope, there would be a big hole, as shown above (left). We’d miss a lot of X-rays! Instead, our mirror makers fill in that cylinder with layers and layers of mirrors, like an onion. Then we can collect more of the X-rays that enter the telescope, giving us more light to study.

Completed X-ray Mirror Assembly for the X-ray Imaging and Spectroscopy Mission (XRISM, pronounced “crism”), which is a collaboration between the Japan Aerospace Exploration Agency (JAXA) and NASA, along with ESA participation. The assembly has thin metal struts fanning outward from a silver ring in the center of the image. Shiny ridge surfaces (actually many thin mirrors!) fill in the spaces between the struts.

Nested mirrors like this have been used in many X-ray telescopes. Above is a close-up of the mirrors for an upcoming observatory called the X-ray Imaging and Spectroscopy Mission (XRISM, pronounced “crism”), which is a Japan Aerospace Exploration Agency (JAXA)-led international collaboration between JAXA, NASA, and the European Space Agency (ESA).

The XRISM mirror assembly uses thin, gold-coated mirrors to make them super reflective to X-rays. Each of the two assemblies has 1,624 of these layers packed in them. And each layer is so smooth that the roughest spots rise no more than one millionth of a millimeter.

Chandra observations of the Perseus galaxy cluster showing turbulence in the hot X-ray-emitting gas.

Why go to all this trouble to collect this elusive light? X-rays are a great way to study the hottest and most energetic areas of the universe! For example, at the centers of certain galaxies, there are black holes that heat up gas, producing all kinds of light. The X-rays can show us light emitted by material just before it falls in.

Stay tuned to NASA Universe on Twitter and Facebook to keep up with the latest on XRISM and other X-ray observatories.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space tech universe nasa astronomy astrophysics technology x ray telescope spaceblr chandra XRISM x-ray vision

1K notes View Post

nasa

7 years ago

New Research Heading to Earth’s Orbiting Laboratory

It’s a bird! It’s a plane! It’s a…dragon? A SpaceX Dragon spacecraft is set to launch into orbit atop the Falcon 9 rocket toward the International Space Station for its 12th commercial resupply (CRS-12) mission August 14 from our Kennedy Space Center in Florida.

It won’t breathe fire, but it will carry science that studies cosmic rays, protein crystal growth, bioengineered lung tissue.

Here are some highlights of research that will be delivered:

I scream, you scream, we all scream for ISS-CREAM!

Cosmic Rays, Energetics and Mass, that is! Cosmic rays reach Earth from far outside the solar system with energies well beyond what man-made accelerators can achieve. The Cosmic Ray Energetics and Mass (ISS-CREAM) instrument measures the charges of cosmic rays ranging from hydrogen to iron nuclei. Cosmic rays are pieces of atoms that move through space at nearly the speed of light

The data collected from the instrument will help address fundamental science questions such as:

Do supernovae supply the bulk of cosmic rays?

What is the history of cosmic rays in the galaxy?

Can the energy spectra of cosmic rays result from a single mechanism?

ISS-CREAM’s three-year mission will help the scientific community to build a stronger understanding of the fundamental structure of the universe.

Space-grown crystals aid in understanding of Parkinson’s disease

The microgravity environment of the space station allows protein crystals to grow larger and in more perfect shapes than earth-grown crystals, allowing them to be better analyzed on Earth.

Developed by the Michael J. Fox Foundation, Anatrace and Com-Pac International, the Crystallization of Leucine-rich repeat kinase 2 (LRRK2) under Microgravity Conditions (CASIS PCG 7) investigation will utilize the orbiting laboratory’s microgravity environment to grow larger versions of this important protein, implicated in Parkinson’s disease.

Defining the exact shape and morphology of LRRK2 would help scientists to better understand the pathology of Parkinson’s and could aid in the development of therapies against this target.

Mice Help Us Keep an Eye on Long-term Health Impacts of Spaceflight

Our eyes have a whole network of blood vessels, like the ones in the image below, in the retina—the back part of the eye that transforms light into information for your brain. We are sending mice to the space station (RR-9) to study how the fluids that move through these vessels shift their flow in microgravity, which can lead to impaired vision in astronauts.

By looking at how spaceflight affects not only the eyes, but other parts of the body such as joints, like hips and knees, in mice over a short period of time, we can develop countermeasures to protect astronauts over longer periods of space exploration, and help humans with visual impairments or arthritis on Earth.

Telescope-hosting nanosatellite tests new concept

The Kestrel Eye (NanoRacks-KE IIM) investigation is a microsatellite carrying an optical imaging system payload, including an off-the-shelf telescope. This investigation validates the concept of using microsatellites in low-Earth orbit to support critical operations, such as providing lower-cost Earth imagery in time-sensitive situations, such as tracking severe weather and detecting natural disasters.

Sponsored by the ISS National Laboratory, the overall mission goal for this investigation is to demonstrate that small satellites are viable platforms for providing critical path support to operations and hosting advanced payloads.

Growth of lung tissue in space could provide information about diseases

The Effect of Microgravity on Stem Cell Mediated Recellularization (Lung Tissue) uses the microgravity environment of space to test strategies for growing new lung tissue. The cells are grown in a specialized framework that supplies them with critical growth factors so that scientists can observe how gravity affects growth and specialization as cells become new lung tissue.

The goal of this investigation is to produce bioengineered human lung tissue that can be used as a predictive model of human responses allowing for the study of lung development, lung physiology or disease pathology.

These crazy-cool investigations and others launching aboard the next SpaceX #Dragon cargo spacecraft on August 14. They will join many other investigations currently happening aboard the space station. Follow @ISS_Research on Twitter for more information about the science happening on 250 miles above Earth on the space station.

Watch the launch live HERE starting at 12:20 p.m. EDT on Monday, Aug. 14!

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Tags

space biology research science nasa bone astronaut Experiment technology learn microgravity spacestation

2K notes View Post

nasa

5 years ago

As astronauts, do you have control over which experiments you conduct aboard the ISS? Which ones have been your personal favorites?

Tags

space Space station science nasa astronauts zero gravity answertime experiments NickHagueAT

482 notes View Post

nasa

2 weeks ago

In this image from Aug. 12, 2024, medical and fire-rescue personnel participate in the Artemis II mission emergency escape or egress verification and validation tests near Launch Complex 39 at NASA's Kennedy Space Center in Florida. A red fire truck appears on the road with the words, “NASA Kennedy Space Center” visible on the side. Credit: NASA/Ben Smegelsky

Artemis Astronauts Have Drills, Too!

Chances are, if you have ever spent time in a school or office building, you have experienced a fire drill. Well, astronauts practice emergency drills, too!

In this image from Aug. 11, 2024, members of the Exploration Ground Systems Program suit up as astronauts and practice the process of getting inside and out of the emergency egress baskets. Three people wearing orange Orion Crew Survival System suits walk in a single file line in the crew access arm toward the emergency egress baskets. The sprinkler system overhead sprays water everywhere. Credit: NASA/Kim Shiflett

Since we began sending astronauts to space, we have used systems and drills to practice moving people safely away from the launch pad in the unlikely event of an emergency during the countdown to launch.

In this image from July 29, 1960, the uncrewed Mercury-Atlas 1 mission launches from Cape Canaveral, Florida. Premature engine cutoff at launch terminated the test and the emergency escape system jettisoned. A bright light flashes and smoke emerges from the escape rocket motor on the top of the rocket. The words, “United States” can be read on the side of the Atlas rocket. Credit: NASA

Early Mercury and Gemini programs in the 1960s used a launch escape system in the form of a solid rocket motor that could pull the astronauts to safety in the event of an emergency. However, this system only accounted for the astronauts, and not other personnel at the launch pad. NASA’s emergency systems have since improved substantially to include everyone.

Artemis II will be NASA’s first mission with crew aboard the SLS (Space Launch System) rocket and Orion spacecraft. Artemis II will fly around the Moon and come back to Earth. Beginning with the Artemis II mission, we will use a track cable to connect the mobile launcher — the ground structure that supports the rocket before and during launch — to the perimeter of the launch pad. Picture a gondola ski lift beginning at the top of the rocket and ending all the way down to the ground. In case of an emergency, astronauts and support crews move from the capsule into the crew access arm, climb into one of four baskets waiting for them, and ride down to the ground.

In this image from Aug. 12, 2024, three members of the Pad Rescue team practice carrying a suited subject out of the emergency egress basket in a stretcher. The Pad Rescue team members are wearing firefighter uniforms and helmets. Credit: NASA/Frank Michaux

There, members of the Pad Rescue team are ready to scoop the astronauts up and whisk them to safety. Think of the Pad Rescue team as spaceflight knights in shining armor. Except instead of saving crew from a fire breathing dragon, they are whisking the astronauts away from a fully loaded skyscraper-sized rocket that’s getting ready to lift off.

In this image from Aug. 13, 2024, a member of the Pad Rescue team practices getting inside and out of the emergency egress baskets. Another member of the Pad Rescue team wearing a firefighter uniform stands with their back to the camera. They face one of the emergency egress baskets while the sprinkler system sprays water everywhere. Credit: NASA/Kim Shiflett

The Artemis II mission will also introduce several new ground systems for the first time – including the new and improved braking system similar to what roller coasters use! Though no NASA mission to date has needed to use its ground-based emergency system during launch countdown, those safety measures are still in place and maintained as a top priority.

So the next time you practice a fire drill at school or at work, remember that these emergency procedures are important for everyone to stay safe — even astronauts.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space Youtube tech moon artemis nasa safety orion astronauts rocket

1K notes View Post

nasa

7 years ago

Voyager: The Spacecraft

The twin Voyager 1 and 2 spacecraft are exploring where nothing from Earth has flown before. Continuing their more-than-40-year journey since their 1977 launches, they each are much farther away from Earth and the Sun than Pluto.

The primary mission was the exploration of Jupiter and Saturn. After making a string of discoveries there – such as active volcanoes on Jupiter’s moon Io and intricacies of Saturn’s rings – the mission was extended.

Voyager 2 went on to explore Uranus and Neptune, and is still the only spacecraft to have visited those outer planets. The adventurers’ current mission, the Voyager Interstellar Mission (VIM), will explore the outermost edge of the Sun’s domain. And beyond.

Spacecraft Instruments

‘BUS’ Housing Electronics

The basic structure of the spacecraft is called the “bus,” which carries the various engineering subsystems and scientific instruments. It is like a large ten-sided box. Each of the ten sides of the bus contains a compartment (a bay) that houses various electronic assemblies.

Cosmic Ray Subsystem (CRS)

The Cosmic Ray Subsystem (CRS) looks only for very energetic particles in plasma, and has the highest sensitivity of the three particle detectors on the spacecraft. Very energetic particles can often be found in the intense radiation fields surrounding some planets (like Jupiter). Particles with the highest-known energies come from other stars. The CRS looks for both.

High-Gain Antenna (HGA)

The High-Gain Antenna (HGA) transmits data to Earth on two frequency channels (the downlink). One at about 8.4 gigahertz, is the X-band channel and contains science and engineering data. For comparison, the FM radio band is centered around 100 megahertz.

Imaging Science Subsystem (ISS)

The Imaging Science Subsystem (ISS) is a modified version of the slow scan vidicon camera designed that were used in the earlier Mariner flights. The ISS consists of two television-type cameras, each with eight filters in a commandable Filter Wheel mounted in front of the vidicons. One has a low resolution 200 mm wide-angle lens, while the other uses a higher resolution 1500 mm narrow-angle lens.

Infrared Interferometer Spectrometer and Radiometer (IRIS)

The Infrared Interferometer Spectrometer and Radiometer (IRIS) actually acts as three separate instruments. First, it is a very sophisticated thermometer. It can determine the distribution of heat energy a body is emitting, allowing scientists to determine the temperature of that body or substance.

Second, the IRIS is a device that can determine when certain types of elements or compounds are present in an atmosphere or on a surface.

Third, it uses a separate radiometer to measure the total amount of sunlight reflected by a body at ultraviolet, visible and infrared frequencies.

Low-Energy Charged Particles (LECP)

The Low-Energy Charged Particles (LECP) looks for particles of higher energy than the Plasma Science instrument, and it overlaps with the Cosmic Ray Subsystem (CRS). It has the broadest energy range of the three sets of particle sensors.

The LECP can be imagined as a piece of wood, with the particles of interest playing the role of the bullets. The faster a bullet moves, the deeper it will penetrate the wood. Thus, the depth of penetration measures the speed of the particles. The number of “bullet holes” over time indicates how many particles there are in various places in the solar wind, and at the various outer planets. The orientation of the wood indicates the direction from which the particles came.

Magnetometer (MAG)

Although the Magnetometer (MAG) can detect some of the effects of the solar wind on the outer planets and moons, its primary job is to measure changes in the Sun’s magnetic field with distance and time, to determine if each of the outer planets has a magnetic field, and how the moons and rings of the outer planets interact with those magnetic fields.

Optical Calibration Target The target plate is a flat rectangle of known color and brightness, fixed to the spacecraft so the instruments on the movable scan platform (cameras, infrared instrument, etc.) can point to a predictable target for calibration purposes.

Photopolarimeter Subsystem (PPS)

The Photopolarimeter Subsystem (PPS) uses a 0.2 m telescope fitted with filters and polarization analyzers. The experiment is designed to determine the physical properties of particulate matter in the atmospheres of Jupiter, Saturn and the rings of Saturn by measuring the intensity and linear polarization of scattered sunlight at eight wavelengths.

The experiment also provided information on the texture and probable composition of the surfaces of the satellites of Jupiter and Saturn.

Planetary Radio Astronomy (PRA) and Plasma Wave Subsystem (PWS)

Two separate experiments, The Plasma Wave Subsystem and the Planetary Radio Astronomy experiment, share the two long antennas which stretch at right-angles to one another, forming a “V”.

Plasma Science (PLS)

The Plasma Science (PLS) instrument looks for the lowest-energy particles in plasma. It also has the ability to look for particles moving at particular speeds and, to a limited extent, to determine the direction from which they come.

The Plasma Subsystem studies the properties of very hot ionized gases that exist in interplanetary regions. One plasma detector points in the direction of the Earth and the other points at a right angle to the first.

Radioisotope Thermoelectric Generators (RTG)

Three RTG units, electrically parallel-connected, are the central power sources for the mission module. The RTGs are mounted in tandem (end-to-end) on a deployable boom. The heat source radioisotopic fuel is Plutonium-238 in the form of the oxide Pu02. In the isotopic decay process, alpha particles are released which bombard the inner surface of the container. The energy released is converted to heat and is the source of heat to the thermoelectric converter.

Ultraviolet Spectrometer (UVS)

The Ultraviolet Spectrometer (UVS) is a very specialized type of light meter that is sensitive to ultraviolet light. It determines when certain atoms or ions are present, or when certain physical processes are going on.

The instrument looks for specific colors of ultraviolet light that certain elements and compounds are known to emit.

Learn more about the Voyager 1 and 2 spacecraft HERE.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Tags

space science nasa voyager instruments discovery exploration spacecraft voyager40

1K notes View Post

nasa

9 years ago

How to Connect with NASA

We're the nation’s space agency, but that doesn’t mean you have to travel to the depths of the universe to stay connected with the awesome stuff we’re doing. There are actually some really easy ways to stay updated on all things space. Check them out:

Apps

We have lots of apps for smartphones and tablets that will make it easier than ever to stay connected to space. Here are a few to pique your interest:

NASA App: Showcases a huge collection of the latest content, including images, videos, mission information, stories, space station sighting opportunities and more! Download: Apple/Android

NASA Spinoff App: This application profiles the best examples of technology that have been transferred from NASA research and missions into commercial products. From life-saving satellite systems to hospital robots, our technologies benefit society. Download: Apple

NASA 3DV App: The 3DV mobile app allows you to examine several of our Deep Space Exploration projects that will take our space program to asteroids, Mars and beyond! Download: Apple/Android

Spacecraft 3D: This augmented reality (AR) application lets you learn about and interact with a variety of spacecraft that are used to explore our solar system, study Earth and observe the universe. Download: Apple/Android

Competitions and Challenges

NASA Solve is an invitation to members of the public to contribute their time and expertise to solving problems and potentially winning prizes as a result of their work. This is a great way for individual members of the public to be a part of the nation’s space program. For a complete list of current challenges and competitions, visit THIS page.

Citizen Science

You don’t have to be a NASA employee to engage in the fun of interpreting scientific data and imagery from our many spacecraft and missions. As part of our Open Government plan, our goal is to promote transparency, participation and collaboration. By expanding the research base and using open innovation, we are all able to benefit from the accumulated findings. You can find data from our missions, research and activities HERE.

Email and Social Media

We have a wide-range of social media accounts here at NASA. Everything from Earth Science to the Mars Curiosity Rover, you can stay updated on many of our missions on many popular social media sites. For a full list of our accounts, visit THIS page.

If you’d like to get space news delivered straight to your inbox, you can sign up for updates and manage preferences HERE.

NASA Socials

What is a NASA Social? We’re glad you asked! These programs provide opportunities for our social media followers to learn and share information about our missions, people and programs. NASA Social includes both special in-person events and social media credentials for individuals who share the news in a significant way. Social events provide the participants with the opportunity to go behind-the-scenes at our facilities and events and speak with scientists engineers, astronauts and managers. Visit THIS page for a list of upcoming NASA Social opportunities.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Tags

space nasa challenge's apps citizenscience connect

850 notes View Post

nasa

5 years ago

Looking 50 Years in the Future with NASA Earth Scientists

In the 50 years since the first Earth Day, the view from space has revolutionized our understanding of Earth’s interconnected atmosphere, oceans, freshwater, ice, land, ecosystems and climate that have helped find solutions to environmental challenges.

If NASA’s Earth science has changed this much in 50 years, what will it look like in 50 more years?

We asked some researchers what they thought. Here are their answers, in their own words.

Mahta Moghaddam is a professor of electrical and computer engineering at the University of Southern California. She’s building a system that helps sensors sync their measurements.

I am interested in creating new ways to observe the Earth. In particular, my team and I are building and expanding a system that will allow scientists to better study soil moisture. Soil moisture plays a vital role in the water and energy cycle and drives climate and weather patterns. When soil is wet and there is enough solar radiation, water can evaporate and form clouds, which precipitate back to Earth. Soil also feeds us – it nourishes our crops and sustains life on Earth. It’s one of the foundations of life! We need to characterize and study soil in order to feed billions of people now and in the future.

Our novel tool aims to observe changes in soil moisture using sensors that talk to each other and make decisions in real time. For instance, if one sensor in a crop field notes that soil is dry in a plot, it could corroborate it with other sensors in the area and then notify a resource manager or decision maker that an area needs water. Or if a sensor in another location senses that soil moisture is changing quickly due to rain or freeze/thaw activity, it could send a command to launch a drone or even to notify satellites to start observing a larger region. We live in one big, connected world, and can and will use many different scales of observations – local to global – from point-scale in-situ sensors to the scales that can be covered by drones, airplanes, and satellites. In just a few years from now, we might see much more vastly automated systems, with some touching not only Earth observations, but other parts of our lives, like drone deliveries of medical tests and supplies.

Odele Coddington is a scientist at the Laboratory for Atmospheric and Space Physics at the University of Colorado, Boulder. She’s building an instrument to measure how much solar energy Earth reflects back into space.

My research is focused on the Earth system response to the Sun’s energy. I spend half of my time thinking about the amount and variability of the Sun’s energy, also known as the solar irradiance. I’m particularly interested in the solar spectral irradiance, which is the study of the individual wavelengths of the Sun’s energy, like infrared and ultraviolet. On a bright, clear day, we feel the Sun’s warmth because the visible and infrared radiation penetrate Earth’s atmosphere to reach the surface. Without the Sun, we would not be able to survive. Although we’ve been monitoring solar irradiance for over 40 years, there is still much to learn about the Sun’s variability. Continuing to measure the solar irradiance 50 years from now will be as important as it is today.

I spend the other half of my time thinking about the many processes driven by the Sun’s energy both within the atmosphere and at the surface. I’m excited to build an instrument that will measure the integrated signal of these processes in the reflected solar and the emitted thermal radiation. This is my first foray into designing instrumentation and it has been so invigorating scientifically. My team is developing advanced technology that will measure Earth’s outgoing radiation at high spatial resolution and accuracy. Our instrument will be small from the onset, as opposed to reducing the size and mass of existing technology. In the future, a constellation of these instruments, launched on miniaturized spacecraft that are more flexible to implement in space, will give us more eyes in the sky for a better understanding of how processes such as clouds, wildfires and ice sheet melting, for instance, alter Earth’s outgoing energy.

Sujay Kumar is a research physical scientist at NASA’s Goddard Space Flight Center. He works on the Land Information System.

Broadly, I study the water cycle, and specifically the variability of its components. I lead the development of a modeling system called the Land Information System that isolates the land and tries to understand all the processes that move water through the landscape. We have conceptual models of land surface processes, and then we try to constrain them with satellite data to improve our understanding. The outputs are used for weather and climate modeling, water management, agricultural management and some hazard applications.

I think non-traditional and distributed platforms will become more the norm in the future. So that could be things like CubeSats and small sats that are relatively cheaper and quicker than large satellites in terms of how much time it takes to design and launch. One of the advantages is that because they are distributed, you’re not relying on a single satellite and there will be more coverage. I also think we’ll be using data from other “signals of opportunity” such as mobile phones and crowd-sourced platforms. People have figured out ways to, for example, retrieve Earth science measurements from GPS signals.

I feel like in the future we will be designing our sensors and satellites to be adaptive in terms of what the observational needs on the ground are. Say a fire or flood happens, then we will tell the satellite to look over there more intensely, more frequently so that we can benefit. Big data is a buzzword, but it’s becoming a reality. We are going to have a new mission call NISAR that’s going to collect so much data that we really have to rethink how traditional modeling systems will work. The analogy I think of is the development of a self-driving car, which is purely data driven, using tons and tons of data to train the model that drives the car. We could possibly see similar things in Earth science.

Hear from more NASA scientists on what they think the future will bring for Earth science:

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

Tags

space snow weather climate change fire ice geography science future earth nasa earth science climate earth day satellite images EarthDayAtHome

1K notes View Post

nasa

8 years ago

Back-to-Back Friday Spacewalks

On Friday, Jan. 6 and Friday, Jan. 13, astronauts on the International Space Station will step outside to perform spacewalks.

What’s a spacewalk? It’s any time an astronaut gets out of a vehicle or spacecraft while in space. It can also be called an EVA (extravehicular activity).

Astronauts go on spacewalks for many reasons. These activities allow crew members to work outside their spacecraft (in this case the space station).

So what specific tasks will astronauts perform in these two upcoming spacewalks? Let’s take a look…

Both spacewalks are being performed to upgrade the orbital outpost’s power system.

The crew members will install adapter plates and hook up electrical connections for six new lithium-ion batteries that were delivered to the station in December.

NASA astronauts Shane Kimbrough and Peggy Whitson will perform the first spacewalk on Jan. 6. The work will continue Jan. 13 during the second spacewalk, which will be conducted by Kimbrough and ESA astronaut Thomas Pesquet.

Prior to each spacewalk, the new batteries will be robotically extracted from a pallet to replace 12 older nickel-hydrogen batteries through a series of robotic operations.