Tour The Ocean Through The Art Of Sound

What's something you didn't know about being an astronaut before you actually became one? Do you have any words of advice for young astronauts?

NASA Spotlight: Christina Hernandez, NASA Mars 2020 Rover Instrument Engineer

“I was in love with the beauty of space. It was my introduction to appreciating the beauty of complex, chaotic things—black holes, giant gas planets, or killer asteroids—that got my imagination riled up.“ -Christina Hernandez

Christina Hernandez, a space enthusiast and self-proclaimed nerd, is an aerospace engineer at our Jet Propulsion Laboratory in California where she works as an instrument engineer on our newest rover mission – Mars2020. The Mars2020 rover is a robotic scientist that is launching to the Red Planet next year. If you would like to launch to the Red Planet as well, you can Send Your Name to Mars along with millions of other people! Christina’s job is to make sure that the instruments we send to the Martian surface are designed, built, tested and operated correctly so we can retrieve allll the science. When she isn’t building space robots, she loves exploring new hiking trails, reading science fiction and experimenting in the kitchen. Christina took a break from building our next Martian scientist to answer some questions about her life and her career: 

If you could go to Mars, would you? And what are three things you’d bring with you?

Only if I had a round trip ticket! I like the tacos and beach here on Earth too much. If I could go, I would bring a bag of Hot Cheetos, a Metallica album, and the book On the Shoulders of Giants.

If you could name the Mars2020 rover, what would you name it and why?

Pilas, a reference to a phrase my family says a lot, ponte las pilas. It literally means put your batteries on or in other words, get to work, look alive or put some energy into it. Our rover is going to need to have her batteries up and running for all the science she is going to be doing! Luckily, the rover has a radioisotope thermoelectric generator (RTG) to help keep the batteries charged!

What’s been your most memorable day at NASA?

It’s been seeing three of the instruments I worked on getting bolted and connected to the flight rover. I’ll never forget seeing the first 1’s and 0’s being exchanged between the rover compute element (RCE), the rover’s on-board brain, and the instruments’ electronics boxes (their brains). I am sure it was a wonderful conversation between the two!

It’s a long journey to get from Earth to Mars. What would be on your ultimate road trip playlist?

Metallica, The Cure, Queen, Echo and the Bunnymen, Frank Sinatra, Ramon Ayala, AC/DC, Selena, Los Angeles Azules, ughhhh – I think I just need a Spotify subscription to Mars.

What is one piece of advice you wish someone would’ve told you?

Take your ego out of the solution space when problem solving.

Do you have any secret skills, talents, or hobbies?

I love reading. Each year I read a minimum of 20 books, with my goal this year being 30 books. It’s funny I increased my goal during what has definitely been my busiest year at work. I recently got into watercolor painting. After spending so much time connected at work, I started looking for more analog hobbies. I am a terrible painter right now, but I painted my first painting the other day. It was of two nebulas! It’s not too bad! I am hoping watercolor can help connect me more to the color complexities of nature...and it’s fun!

What’s a project or problem that you would love the ability to tackle/work on?

I would love to work on designs for planetary human explorers. So far, I have focused on robotic explore, but when you throw a “loveable, warm, squishy thing” into the loop, its creates a different dimension to design – both with respect to operability and risk.

Thanks so much Christina! The Mars2020 rover is planned to launch on July 17, 2020, and touch down in Jezero crater on Mars on February 18, 2021.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

When you went into space for the first time, what was it like? Were you nervous?

Small Businesses Help Us Explore Space!

Earlier this month, Congress introduced a resolution officially recognizing Nov. 24, 2018 as Small Business Saturday “to increase awareness of the value of locally owned small businesses and the impact of locally owned small businesses on the economy of the United States.”

This annual American Express campaign began on the Saturday after Thanksgiving in 2010 to support “local places that make our communities strong.”

For 60 years, we have supported and partnered with small businesses across the country to pioneer the future of space exploration, scientific discovery and aeronautics research.

Our Small Business Innovative Research (SBIR) and Small Business Technology Transfer (STTR) program funds the research, development and demonstration of innovative technologies that help address space exploration challenges and have significant potential for commercialization. In 2018, our program awarded 555 contracts to small businesses for a total of $180.1 million.

NASA works with small business Nanocomp Technologies Inc. of Merrimack, New Hampshire, to advance manufacturing of carbon nanotube composite materials.

Our investments in small businesses help equip future missions to the Moon, Mars and beyond by advancing our science and technology capabilities. They also benefit the U.S. economy. The SBIR/STTR program’s 2017 Economic Impact Report indicated a $2.74 return for every dollar spent on awards—money well spent!

Small businesses also contribute to scientific advances for the International Space Station as well as here on Earth. Pancopia, Inc. in Hampton, Virginia, developed an innovative, high-performance water recycling system to remove high levels of organic carbon and nitrogen in wastewater. Recycling water in space saves money on resupply and enables more Earth-independence and self-reliance. With the help of an SBIR award, Pancopia is also working on a similar system for public wastewater that has the potential to cut treatment expenses to less than half the current costs.

Small businesses also contribute to scientific advances for the International Space Station as well as here on Earth. Pancopia, Inc. in Hampton, Virginia, developed an innovative, high-performance water recycling system to remove high levels of organic carbon and nitrogen in wastewater. Recycling water in space saves money on resupply and enables more Earth-independence and self-reliance. With the help of an SBIR award, Pancopia is also working on a similar system for public wastewater that has the potential to cut treatment expenses to less than half the current costs.

When NASA went to the private sector to develop deformable mirror technology—a key component of starlight-blocking instruments—a small business in Berkeley, California, applied for research and development funding through SBIR to design extra-precision, segmented mirrors. This innovative approach for a small deformable mirror made up of many tiny hexagonal segments enables advanced control when paired with other optics.

Data collected by a telescope using the Iris AO deformable mirror can be used to determine if the target investigated in space is an exoplanet based on its orbit, and if the exoplanet has atmosphere using color spectrum imaging analysis. The Iris AO technology is currently being refined and prepared for inclusion in a future exoplanet mission.

Does your small business have a big idea? Your next opportunity to join our SBIR/STTR program starts on Jan. 7, 2019, when our next solicitation opens. We’ll be seeking new innovative ideas from small businesses and research institutions for research, development and demonstration of innovative technologies. Go to https://www.nasa.sbir.gov/ to learn more.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Is it fun working at NASA?

Pi Guides the Way

It may be irrational but pi plays an important role in the everyday work of scientists at NASA. 

What Is Pi ?

Pi is the ratio of a circle’s circumference to its diameter. It is also an irrational number, meaning its decimal representation never ends and it never repeats. Pi has been calculated to more than one trillion digits, 

Why March 14?

March 14 marks the yearly celebration of the mathematical constant pi. More than just a number for mathematicians, pi has all sorts of applications in the real world, including on our missions. And as a holiday that encourages more than a little creativity – whether it’s making pi-themed pies or reciting from memory as many of the never-ending decimals of pi as possible (the record is 70,030 digits).

While 3.14 is often a precise enough approximation, hence the celebration occurring on March 14, or 3/14 (when written in standard U.S.  month/day format), the first known celebration occurred in 1988, and in 2009, the U.S. House of Representatives passed a resolution designating March 14 as Pi Day and encouraging teachers and students to celebrate the day with activities that teach students about pi.

5 Ways We Use Pi at NASA

Below are some ways scientists and engineers used pi.

Keeping Spacecraft Chugging Along

Propulsion engineers use pi to determine the volume and surface area of propellant tanks. It’s how they size tanks and determine liquid propellant volume to keep spacecraft going and making new discoveries. 

Getting New Perspectives on Saturn

A technique called pi transfer uses the gravity of Titan’s moon, Titan, to alter the orbit of the Cassini spacecraft so it can obtain different perspectives of the ringed planet.

Learning the Composition of Asteroids

Using pi and the asteroid’s mass, scientists can calculate the density of an asteroid and learn what it’s made of--ice, iron, rock, etc.

Measuring Craters

knowing the circumference, diameter and surface area of a crater can tell scientists a lot about the asteroid or meteor that may have carved it out.

Determining the Size of Exoplanets

Exoplanets are planets that orbit suns other than our own and scientists use pi to search for them. The first step is determining how much the light curve of a planet’s sun dims when a suspected planets passes in front of it.

Want to learn more about Pi? Visit us on Pinterest at: https://www.pinterest.com/nasa/pi-day/

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Hubble’s Guide to Viewing Deep Fields

They say a picture is worth a thousand words, but no images have left a greater impact on our understanding of the universe quite like the Hubble Space Telescope’s deep fields. Like time machines, these iconic images transport humanity billions of light-years back in time, offering a glimpse into the early universe and insight into galaxy evolution!

You’ve probably seen these images before, but what exactly do we see within them? Deep field images are basically core samples of our universe. By peering into a small portion of the night sky, we embark on a journey through space and time as thousands of galaxies appear before our very eyes.

So, how can a telescope the size of a school bus orbiting 340 miles above Earth uncover these mind-boggling galactic masterpieces? We’re here to break it down. Here’s Hubble’s step-by-step guide to viewing deep fields:

Step 1: Aim at the darkness

Believe it or not, capturing the light of a thousand galaxies actually begins in the dark. To observe extremely faint galaxies in the farthest corners of the cosmos, we need minimal light interference from nearby stars and other celestial objects. The key is to point Hubble’s camera at a dark patch of sky, away from the outer-edge glow of our own galaxy and removed from the path of our planet, the Sun, or the Moon. This “empty” black canvas of space will eventually transform into a stunning cosmic mosaic of galaxies.

The first deep field image was captured in 1995. In order to see far beyond nearby galaxies, Hubble’s camera focused on a relatively empty patch of sky within the constellation Ursa Major. The results were this step-shaped image, an extraordinary display of nearly 3,000 galaxies spread across billions of light-years, featuring some of the earliest galaxies to emerge shortly after the big bang.

Step 2: Take it all in

The universe is vast, and peering back billions of years takes time. Compared to Hubble’s typical exposure time of a few hours, deep fields can require hundreds of hours of exposure over several days. Patience is key. Capturing and combining several separate exposures allows astronomers to assemble a comprehensive core slice of our universe, providing key information about galaxy formation and evolution. Plus, by combining exposures from different wavelengths of light, astronomers are able to better understand galaxy distances, ages, and compositions.

The Hubble Ultra Deep Field is the deepest visible-light portrait of our universe. This astonishing display of nearly 10,000 galaxies was imaged over the course of 400 Hubble orbits around Earth, with a total of 800 exposures captured over 11.3 days.

Step 3: Go beyond what’s visible

The ability to see across billions of light-years and observe the farthest known galaxies in our universe requires access to wavelengths beyond those visible to the human eye. The universe is expanding and light from distant galaxies is stretched far across space, taking a long time to reach us here on Earth. This  phenomenon, known as “redshift,” causes longer wavelengths of light to appear redder the farther they have to travel through space. Far enough away, and the wavelengths will be stretched into infrared light. This is where Hubble’s infrared vision comes in handy. Infrared light allows us to observe light from some of the earliest galaxies in our universe and better understand the history of galaxy formation over time.

In 2009, Hubble observed the Ultra Deep Field in the infrared. Using the Near Infrared Camera and Multi-Object Spectrometer, astronomers gathered one of the deepest core samples of our universe and captured some of the most distant galaxies ever observed.

Step 4: Use your time machine

Apart from their remarkable beauty and impressive imagery, deep field images are packed with information, offering astronomers a cosmic history lesson billions of years back in time within a single portrait. Since light from distant galaxies takes time to reach us, these images allow astronomers to travel through time and observe these galaxies as they appear at various stages in their development. By observing Hubble’s deep field images, we can begin to discover the questions we’ve yet to ask about our universe.

Credit: NASA, ESA, R. Bouwens and G. Illingworth (University of California, Santa Cruz)

Hubble’s deep field images observe galaxies that emerged as far back as the big bang. This image of the Hubble Ultra Deep Field showcases 28 of over 500 early galaxies from when the universe was less than one billion years old. The light from these galaxies represent different stages in their evolution as their light travels through space to reach us.

Step 5: Expand the cosmic frontier

Hubble’s deep fields have opened a window to a small portion of our vast universe, and future space missions will take this deep field legacy even further. With advancements in technologies and scientific instruments, we will soon have the ability to further uncover the unimaginable.

Slated for launch in late 2021, NASA’s James Webb Space Telescope will offer a new lens to our universe with its impressive infrared capabilities. Relying largely on the telescope’s mid-infrared instrument, Webb will further study portions of the Hubble deep field images in greater detail, pushing the boundaries of the cosmic frontier even further.

And there you have it, Hubble’s guide to unlocking the secrets of the cosmos! To this day, deep field images remain fundamental building blocks for studying galaxy formation and deepening not only our understanding of the universe, but our place within it as well.

Still curious about Hubble Deep Fields? Explore more and follow along on Twitter, Facebook, and Instagram with #DeepFieldWeek!

Make sure to follow us on Tumblr for your regular dose of space!

Space Telescope Gets to Work

Our latest space telescope, Transiting Exoplanet Survey Satellite (TESS), launched in April. This week, planet hunters worldwide received all the data from the first two months of its planet search. This view, from four cameras on TESS, shows just one region of Earth’s southern sky.

The Transiting Exoplanet Survey Satellite (TESS) captured this strip of stars and galaxies in the southern sky during one 30-minute period in August. Created by combining the view from all four of its cameras, TESS images will be used to discover new exoplanets. Notable features in this swath include the Large and Small Magellanic Clouds and a globular cluster called NGC 104. The brightest stars, Beta Gruis and R Doradus, saturated an entire column of camera detector pixels on the satellite’s second and fourth cameras.

Credit: NASA/MIT/TESS

The data in the images from TESS will soon lead to discoveries of planets beyond our solar system – exoplanets. (We’re at 3,848 so far!)

But first, all that data (about 27 gigabytes a day) needs to be processed. And where do space telescopes like TESS get their data cleaned up? At the Star Wash, of course!

TESS sends about 10 billion pixels of data to Earth at a time. A supercomputer at NASA Ames in Silicon Valley processes the raw data, turning those pixels into measures of a star’s brightness.

And that brightness? THAT’S HOW WE FIND PLANETS! A dip in a star’s brightness can reveal an orbiting exoplanet in transit.

TESS will spend a year studying our southern sky, then will turn and survey our northern sky for another year. Eventually, the space telescope will observe 85 percent of Earth’s sky, including 200,000 of the brightest and closest stars to Earth.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Navigating Space by the Stars

A sextant is a tool for measuring the angular altitude of a star above the horizon and has helped guide sailors across oceans for centuries. It is now being tested aboard the International Space Station as a potential emergency navigation tool for guiding future spacecraft across the cosmos. The Sextant Navigation investigation will test the use of a hand-held sextant that utilizes star sighting in microgravity. 

Read more about how we’re testing this tool in space!  

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Make Sure You Observe the Moon on October 20

On Saturday, October 20, NASA will host the ninth annual International Observe the Moon Night. One day each year, everyone on Earth is invited to observe and learn about the Moon together, and to celebrate the cultural and personal connections we all have with our nearest celestial neighbor.

There are a number of ways to celebrate. You can attend an event, host your own, or just look up! Here are 10 of our favorite ways to observe the Moon:

1. Look up

Image credit: NASA’s Scientific Visualization Studio/Ernie Wright

The simplest way to observe the Moon is simply to look up. The Moon is the brightest object in our night sky, the second brightest in our daytime sky and can be seen from all around the world — from the remote and dark Atacama Desert in Chile to the brightly lit streets of Tokyo. On October 20, the near side of the Moon, or the side facing Earth, will be about 80 percent illuminated, rising in the early evening.

See the Moon phase on October 20 or any other day of the year!

2. Peer through a telescope or binoculars

The Moon and Venus are great targets for binoculars. Image Credit: NASA/Bill Dunford

With some magnification help, you will be able to focus in on specific features on the Moon, like the Sea of Tranquility or the bright Copernicus Crater. Download our Moon maps for some guided observing on Saturday.

3. Photograph the Moon

Image credit: NASA/GSFC/ASU

Our Lunar Reconnaissance Orbiter (LRO) has taken more than 20 million images of the Moon, mapping it in stunning detail. You can see featured, captioned images on LRO’s camera website, like the one of Montes Carpatus seen here. And, of course, you can take your own photos from Earth. Check out our tips on photographing the Moon!

4. Take a virtual field trip

Image credit: NASA/JPL-Caltech

Plan a lunar hike with Moontrek. Moontrek is an interactive Moon map made using NASA data from our lunar spacecraft. Fly anywhere you’d like on the Moon, calculate the distance or the elevation of a mountain to plan your lunar hike, or layer attributes of the lunar surface and temperature. If you have a virtual reality headset, you can experience Moontrek in 3D.

5. Touch the topography

Image credit: NASA GSFC/Jacob Richardson

Observe the Moon through touch! If you have access to a 3D printer, you can peruse our library of 3D models and lunar landscapes. This model of the Apollo 11 landing site created by NASA scientist Jacob Richardson, is derived from LRO’s topographic data. Near the center, you can actually feel a tiny dot where astronauts Neil Armstrong and Buzz Aldrin left the Lunar Descent Module.

6. Make Moon art

Image credit: LPI/Andy Shaner

Enjoy artwork of the Moon and create your own! For messy fun, lunar crater paintings demonstrate how the lunar surface changes due to consistent meteorite impacts.

7. Relax on your couch

Image credit: NASA’s Scientific Visualization Studio/Ernie Wright

There are many movies that feature our nearest neighbor, from A Voyage to the Moon by George Melies, to Apollo 13, to the newly released First Man. You can also spend your evening with our lunar playlist on YouTube or this video gallery, learning about the Moon’s role in eclipses, looking at the Moon phases from the far side, and seeing the latest science portrayed in super high resolution. You’ll impress all of your friends with your knowledge of supermoons.

8. Listen to the Moon

Video credit: NASA’s Scientific Visualization Studio/Ernie Wright

Make a playlist of Moon songs. For inspiration, check out this list of lunar tunes. We also recommend LRO’s official music video, The Moon and More, featuring Javier Colon, season 1 winner of NBC’s “The Voice.” Or you can just watch this video featuring “Clair de Lune,” by French composer Claude Debussy, over and over.

9. See the Moon through the eyes of a spacecraft

Image credit: NASA/GSFC/MIT

Visible light is just one tool that we use to explore our universe. Our spacecraft contain many different types of instruments to analyze the Moon’s composition and environment. Review the Moon’s gravity field with data from the GRAIL spacecraft or decipher the maze of this slope map from the laser altimeter onboard LRO. This collection from LRO features images of the Moon’s temperature and topography. You can learn more about our different missions to explore the Moon here.

10. Continue your observations throughout the year

Image credit: NASA’s Scientific Visualization Studio/Ernie Wright

An important part of observing the Moon is to see how it changes over time. International Observe the Moon Night is the perfect time to start a Moon journal. See how the shape of the Moon changes over the course of a month, and keep track of where and what time it rises and sets. Observe the Moon all year long with these tools and techniques!

However you choose to celebrate International Observe the Moon Night, we want to hear about it! Register your participation and share your experiences on social media with #ObserveTheMoon or on our Facebook page. Happy observing!

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.